36 inch Wireless Snake Camera / Borescope / Inspection Camera w/ Monitor

Features Allows for easy visual inspections in hard to reach areas. Mini water-proof camera with 1m(3Ft.) flexible extended tube Night Vision Range:1.5m

Specifications Camera specifications: Image Sensor: CMOS Total Pixels: 704×576 (PAL); 712×486(NTSC) Horizontal View Angle: 50 degree Transmission Frequency: 2468MHz Minimum Illumination: 0 Lux Modulation Type: FM Bandwidth: 25MHz Power Supply: 4 x AA Dimensions (W x D x H): 186 x 145 x 41(mm) (Exclude Flexible Tube) Weight(about): 530g Monitor parameters: LCD Screen Type: 2.36″TFT-LCD Effective Pixels: 480 x 240 Video System: PAL/NTSC Transmission Frequency: 2468MHz Consumption Current (Max): 450mA Video Output Level: 0.9-1.3VP-P@75ohm Dimensions (W x D x H): 100 x 70x 30(mm) Weight(About): 140g Operating Temperature: -10°C to +50 °C/+14°F to +122°F Operating Humidity (Max.): 15 to 85%RH

FAQ -

Q. Can the monitor be used on and off of the hand held?
A. Yes you can either keep the monitor mounted on the hand held or use it remotely.

Q. How far away can the monitor be used away from the hand held?
A. It really depends on the environment you are trying to use it in. 10ft should be expected however you may realize much greater depending on the strength of the batteries at the time and the RF interference at the location you are using the Wireless Inspection Camera.

Q. Is the unit water proof or can it be used in liquid?
A. The image head and cable are water resistant but should not be used in any liquid of any kind. Any liquid can damage the unit.